|
Product Details:
|
| Max. Sine Force: | 3000 Kg.f (30kN) | Vertical Payload: | 500 Kg |
|---|---|---|---|
| Max. Acceleration: | 100G | Power Supply: | AC 380V 50Hz |
| Shaker Size: | 1290 X 1010 X 1400 Mm (LxDxH) | Armature Diameter: | Ф440 Mm |
| Highlight: | AC 380V Vibration Shaker Table,Double Magnetic Circuit Vibration Shaker Table,3000kg.f Vibration Analysis Equipment |
||
Sine and Random Vibration Test System with Controller for MIL-STD 810F
Introduction:
The purpose of vibration test may be a single vibration environmental function test or vibration durability test, or a number of vibration tests may be carried out simultaneously, such as evaluating the structural strength, evaluating the vibration environmental adaptability of instruments and equipment, and testing the dynamic characteristics of specimens, and the checking the level of process assembly and so on.
Test conditions shall generally include vibration test frequency range, vibration magnitude, vibration duration, vibration direction, vibration type (sinusoidal vibration, random vibration or mixed vibration) and test tolerance limits. Decide whether the test should be carried out in one direction(And, if necessary, the order of tests in the X,Y, and Z directions) or in three directions at the same time.
| Shaker Specifications VG3000-50 | |
| Peak Sine (Pk) | 3000Kg.f peak |
| Random (RMS) | 3000Kg.f r.ms @ISO5344 |
| Shock (Pk) | 6000Kg.f peak @6ms |
| Usable Frequency | 1-3000Hz |
| Maximum Displacement (p-p) | 51mm (2inch) |
| Max. velocity | 2m/s |
| Max. acceleration | Sine:85G (883 m/s2)；Random: 60G (588 m/s2) |
| Vertical Load Support | 500 kg |
|
Body Suspension Natural Frequency (Thrust Axis) |
Less than 2.5 Hz |
| Armature Diameter | Ф440 mm |
| Armature Weight | 35kg |
|
Fundamental Resonance Frequency (Bare table) |
2,400 Hz (nom.) +/- 5% |
|
Load Attachment Points (Standard) |
16 stainless steel M10 Inserts |
| Stray Flux Density | ＜10gauss |
| Allowable partial force | 500.N.M |
| Shaker dimensions | 1290 x 1010 x 1400 mm (LxDxH) |
| Weight of Shaker | About 2600Kg |
| Power Amplifier Specifications SA303 | |
| Rated Output Capacity | 30KVA |
| Signal to Noise Ratio | Greater than 65 dB |
| Amplifier Efficiency | Greater than 90% |
| Amplifier Overall Dimensions | 650 x 920 x 2100 mm (LxDxH) |
| Interlock Protection | ●Input Over/Under Voltage ●Logic Fault ●Output Over Voltage/Current ●Control Power ●External ●Shaker Oil Pressure ●Module O/T ●Shaker Temp ●Shaker Travel |
| Shaker controller Specifications VCS4X-2 | |
| Hardware(BOX) |
2 Analog Input Channels 1 Drive Channel 300MHz DSP Processing Ethernet or USB Port Connecting to PC -20~60℃ Working Temperature Fanless Structure to Reduce the Background Noise 160 dB / Octave Anti-aliasing Filter 24-bit ADC/DAC, Less than 120dB Dynamic Range 102.4 kHz Sampling Rate, 40kHz Frequency Range Floating Ground Design Reduces Ground |
| Control Functions | ●Base Random,●Swept Sine,●Classic Shock, |
| PC Configuration: |
● ACER PC Windows 7/ 8 OS and an Ethernet port.and 5 Usb2.0 port Microsoft Word / Excel and PDF are recommended.(options) |
| Control Accelerometers |
●Mode: LAB24110 Frequency range:1—5000Hz Sensitivity: 30 +/- 10% pC/g Temperature range: -40℃ to 160℃ Including length 10M, PVC "BNC-M5" low noise cable |
Other models: EV203-EV220
| Model | EV203 | EV206 | EV210 | EV220 |
| Vibration Generator | VG300/40 | VG300/50 | VG1000/50 | VG2000/50 |
| Frequency(Hz) | 2-2500 | 2-3000 | 2-3000 | 2-2500 |
| Max Exiting Force(kg.f) | 300 | 600 | 1000 | 2000 |
|
Max. Displacement (mm p-p) |
38 | 50 | 50 | 50 |
| Max. Acceleration(g) | 100 | 100 | 100 | 100 |
| Max. Velocity(cm/s) | 120 | 200 | 200 | 200 |
| Payload(kg) | 120 | 200 | 300 | 400 |
| Armature Mass(kg) | 3 | 6 | 10 | 20 |
| Armature Diameter(mm) | φ150 | φ200 | φ240 | φ320 |
| Cooling Method | Forced Air Cooling | |||
| Vibration Generator Weight(kg) | 460 | 920 | 1100 | 1600 |
| Vibration Generator Dimension L*W*H(MM) | 750*555*670 | 800*600*710 | 845*685*840 | 1200*870*1100 |
| Power Amplifier | Amp3k | Amp6k | Amp12k | Amp22k |
| Cooling Method | Forced Air Cooling | |||
| Power Amplifier Weight(kg) | 250 | 320 | 350 | 500 |
| Power Amplifier Dimension L*W*H(MM) | 800*550*1250 | 800*550*1250 | 800*550*1520 | 800*550*1520 |
| Utility Requirements |
3-phase AC380V ±10% 50Hz | |||
| Aggregate Capacity(KW) | 9 | 20 | 25 | 35 |
Meet Standards:
MIL-STD, DIN, ISO, ASTM, IEC, ISTA, GB, GJB, JIS, BS etc.
Applicable Industries:
Automotive electronics device, Motormeter assembly, Automobile storage battery, Automotive electric equipments, Automotivemotor, Water-soluble dielectric battery, Safety valve, Auto air conditioning compressor etc.
Features:
| Pre-sales service |
| Technical Advisory: Testing method, laboratory planning and advice |
| Equipment Selection: Type-selecting scheme,FAQ |
| Product testing scheme |
| Selling service |
| Customer Communication,progress communication |
| Before installation, we will provide guidance of preparation , equipment debugging, equipment commissioning |
| Cooperate with measuring if need the third party verification |
| After-sale service |
| Quality assurance period for one year,lifelong maintenance. |
| Technical guidance |
| Feedback within 2 hours after get the call. |
| Accept OEM, Design service,Buyer label |
Detailed Pictures:
Contact Person: Mr. Labtone
Fax: 86-769-85370093
